Comprehensive Guide to Resolving Pixel eSIM eUICC Issues

Comprehensive Guide to Repairing Pixel eSIM eUICC Issues

The Pixel eSIM/eUICC fix process presents a solution for users experiencing technical difficulties related to their embedded SIM functionalities. However, it is crucial to acknowledge that this procedure necessitates root access. Users should also be aware that this process may regenerate the eSIM identification (eID), potentially affecting any existing eSIM profiles. Therefore, it is recommended that you back up all important information before proceeding.

Requirements for the Fix

• Rooted Pixel device
• USB debugging enabled
• A computer with ADB configured

Step-by-Step Fix Process

Step 1: Open an ADB Shell

Begin by connecting your Pixel device to your computer and executing the following command:

adb shell Step 2: Obtain Root Access

Within the ADB shell, enter the following command:

su

If prompted, grant root access on your device.

Step 3: Set Temporary System Properties

Execute the following commands, one at a time, within the same root shell:

resetprop ro.build.type eng resetprop ro.build.tags eng resetprop ro.debuggable 1 setenforce 0 Step 4: Restart the Framework

Run the command to restart the framework:

stop && sleep 2 && start

At this stage, the phone will reboot. It is vital not to close the ADB shell. Once the Android operating system has fully booted, unlock your device and continue using the same shell session.

Step 5: Open the Firmware Updater App

Initiate the firmware updater application by executing the following command:

am start -n com.google.euiccpixel/com.google.euiccpixel.ui.OtaUpdateMenu

The NFC/eSE/eSIM firmware updater application should now appear on your device.

Step 6: Select the Firmware

Follow these instructions to select the appropriate firmware version:

1. Access the Firmware Upgrade drop-down menu.
2. Select the firmware: GGL_P24_ST54L_GSMALIVE_534-1.1_DVT_CC9_v2
3. Tap SE FIRMWARE UPGRADE.
4. Confirm by tapping CONTINUE.

Step 7: Wait for Completion

Remain patient while the process completes. It is imperative that you do not reboot your phone, disconnect any cables, or close the upgrade application during this phase.

Step 8: Reboot the Phone

Once the firmware upgrade has been successfully completed, reboot your phone. You can either restart it from the power menu or execute:

reboot

Upon booting, check that the eSIM/eUICC functionality is operational. The device is now fixed and ready for normal use. You may also clean-flash the device or relock the bootloader if desired.

Final Notes

• ⚠️ Please note that your eID may be regenerated after this update. If your existing eSIM profile is no longer operational, it is recommended to contact your carrier or utilize its app or website to issue and install a new eSIM profile.

Summary Table of the Fix Process

Step	Action
1	Open ADB shell
2	Obtain root access
3	Set system properties
4	Restart framework
5	Open firmware updater
6	Select firmware version
7	Wait for completion
8	Reboot device

By adhering to these instructions diligently, users can effectively address and repair any complications related to their Pixel device's eSIM and eUICC functionalities.

Pixel eSIM eUICC Fix Guide > ⚠️ Warning: This process requires root access. Your eID may be regenerated, which can affect existing eSIM profiles. Back up anything important and be prepared to download or reactivate your eSIM afterward. Requirements • Rooted Pixel device • USB debugging enabled • A computer with ADB configured Step 1 — Open an ADB shell Connect the phone to your computer, then run: adb shell Step 2 — Obtain root access Inside the ADB shell, run: su Grant the root request on the phone if prompted. Step 3 — Set temporary system properties Run the following commands one at a time in the same root shell: resetprop ro.build.type eng resetprop ro.build.tags eng resetprop ro.debuggable 1 setenforce 0 Step 4 — Restart framework Run: stop && sleep 2 && start The phone will reboot. Do not close the ADB shell. Once Android has fully booted, unlock the phone and continue using the same shell session. Step 5 — Open the firmware updater app Run: am start -n com.google.euiccpixel/com.google.euiccpixel.ui.OtaUpdateMenu NFC/eSE/eSIM firmware updater application should now open on the phone. Step 6 — Select the firmware 1. Open the Upgrade Firmware drop-down menu. 2. Select: GGL_P24_ST54L_GSMALIVE_534-1.1_DVT_CC9_v2 3. Tap SE FIRMWARE UPGRADE. 4. Tap CONTINUE to confirm. Step 7 — Wait for completion Wait until the process finishes. Do not reboot the phone, disconnect anything, or close the upgrade application while the firmware update is in progress. Step 8 — Reboot the phone After the firmware upgrade has completed successfully, reboot the phone normally. You can restart it from the power menu or run: reboot Once the phone has booted and eSIM/eUICC functionality is working, the device is fixed and ready for normal use. You can now clean-flash the device or relock the bootloader if needed. Done. > ⚠️ Your eID may be regenerated after the update. If your existing eSIM profile no longer works, contact your carrier or use its app/website to issue and install a new eSIM profile. XDA Thread Full guide and discussion: XDA: Pixel eSIM / eUICC Fix Guide Tentacles Channel. Subscribe. Pixel eSIM eUICC Fix Guide > ⚠️ Warning: This process requires root access. Your eID may be regenerated, which can affect existing eSIM profiles. Back up anything important and be prepared to download or reactivate your eSIM afterward. Requirements • Rooted Pixel device • USB debugging enabled • A computer with ADB configured Step 1 — Open an ADB shell Connect the phone to your computer, then run: adb shell Step 2 — Obtain root access Inside the ADB shell, run: su Grant the root request on the phone if prompted. Step 3 — Set temporary system properties Run the following commands one at a time in the same root shell: resetprop ro.build.type eng resetprop ro.build.tags eng resetprop ro.debuggable 1 setenforce 0 Step 4 — Restart framework Run: stop && sleep 2 && start The phone will reboot. Do not close the ADB shell. Once Android has fully booted, unlock the phone and continue using the same shell session. Step 5 — Open the firmware updater app Run: am start -n com.google.euiccpixel/com.google.euiccpixel.ui.OtaUpdateMenu NFC/eSE/eSIM firmware updater application should now open on the phone. Step 6 — Select the firmware 1. Open the Upgrade Firmware drop-down menu. 2. Select: GGL_P24_ST54L_GSMALIVE_534-1.1_DVT_CC9_v2 3. Tap SE FIRMWARE UPGRADE. 4. Tap CONTINUE to confirm. Step 7 — Wait for completion Wait until the process finishes. Do not reboot the phone, disconnect anything, or close the upgrade application while the firmware update is in progress. Step 8 — Reboot the phone After the firmware upgrade has completed successfully, reboot the phone normally. You can restart it from the power menu or run: reboot Once the phone has booted and eSIM/eUICC functionality is working, the device is fixed and ready for normal use. You can now clean-flash the device or relock the bootloader if needed. Done. > ⚠️ Your eID may be regenerated after the update. If your existing eSIM profile no longer works, contact your carrier or use its app/website to issue and install a new eSIM profile. XDA Thread Full guide and discussion: XDA: Pixel eSIM / eUICC Fix Guide Tentacles Channel. Subscribe.